Tungsten copper tube
High-voltage electrode discharge tube
MG Metal specializes in producing high purity Tungsten Copper Alloy Tubes with various diameter and wall thicknesses. Standard compositions of Tungsten Copper alloys include W72/Cu28, W60/Cu40, and W80/Cu20. MG Metal can produce materials to custom specifications by request, in addition to custom compositions for commercial and research applications and new proprietary technologies. MG metal also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as numerous other machined shapes, nanomaterials, and in the form of solutions and organometallic compounds . American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.
High-voltage vacuum discharge tube in the workplace, the contact material in a few seconds of time zero temperatures thousands of degrees Celsius, while the W-Cu anti-ablation properties, high toughness, good electrical conductivity, thermal conductivity performance to the discharge tube to provide the necessary stability conditions
Tungsten copper tube is most widely used to machine tungsten carbide when fine surface finishes are required. Thin sheets, small diameter rods, and tubing are all 60/40 (60% Tungsten, 40% copper) composition. Plates, round bars and square bars are 70/30 (70% tungsten, 30% copper) composition.
Tungsten Copper Tube (WCu)
2) Class: Round tube and Square tube
OD:5.0mm to 300 mm; Length: max 300 mm; Wall thickness: min 0.3 mm
Wall Thickness: 0.3-20mm*10-120mm*10-120mm; Length: 300mm
All can be produced as the requirements of customers.