Tungsten Copper Alloy

Home > Products > Tungsten Copper Alloy > >

Tungsten copper rod/bar

Tungsten copper rod/bar


Tungsten copper rod/Tungsten Copper Blank Rod/Tungsten Copper Polished Rod

Tungsten copper rod is a combination of tungsten and copper. 
The manufacturing process is as follows: press the refractory metal, sinter the pressed compact at a high temperature, and infiltrate it with copper. All this is done under very closely controlled conditions. The result is a relatively hard material with superior arc and wear resistance, high physical Properties: at elevated temperatures, and good electrical and thermal conductivity.

We can provide tungsten copper rod: 
Diameter≥0.9mm; Length≤300mm; 
Tungsten content: 
55%-90%W tungsten copper rod is available. 
All can be produced as the requirements of customers, and you canuse our tungsten copper rods machining to your tagart dimension.
Composition:80W20Cu; Φ7.85mm×200mm


Copper Tungsten Rod Main Grades and Properties:W50 Tungsten Copper Rod/W55 Tungsten Copper Rod/W60 Tungsten Copper Rod/W65 Tungsten Copper Rod/W70 Tungsten Copper Rod/W75 Tungsten Copper Rod/W80 Tungsten Copper Rod/W85 Tungsten Copper Rod/W90 Tungsten Copper Rod/Tungsten Copper EDM Rod/Resistance Welding Rod/Discharge Tube Rod



· excellent arc resistance

· outstanding electrical conductivity

· high strength

· good machinability

· very good thermal conductivity

· low thermal expansion


To provide you with the online service